Ford vcm 2 calibration files Patch#

Here is the IDS patch free download, you can try it at your own risk:

You can still put files directly into the calibration folder manually andВ use it offline. That means you wonвЂ™t be able to access all the вЂњonlineвЂќ functions with a patched software. Question: Where to download the patch for IDS & FJDS?ДЄnswer: The patch youвЂ™re using comes from an old version of the software.ДЇord has changed its way of getting file from the server since ( i think ) v114 or v115.

Works with VCM2 / Vxdiag vcx nano Ford/ other J2534 You will quickly figure out what revisions are available.Free download Ford IDS + FJDS + Mazda IDS + FDRS Just enter the SW parts and try changing the revision number. You can check the calibration revisions here: When entering the calibration in IDS you will need to use any but the latest (otherwise IDS won't let you upgrade). The last character is the revision of the calibration - BK21-14C204-BNP was before BK21-14C204-BNU and BK21-14C204-BNU was before BK21-14C204-BNV. It will be in the following format: BK21-14C204-BNU. Go back to ETIS Online and write down the SW number for PCM (calibration numbers). Once you happy with your reference vehicle - we can move on and find the calibration numbers for it.

Ford vcm 2 calibration files serial number#

My reference vehicle was 1 serial number below my VIN The alternative way of finding reference VIN is just using ETIS Online - just experiment entering VIN that is next to yours (serial number). Make sure the HW number of PCM is the same and other modules are not far off. If the numbers match (dot to dot) run both the VINs through ETIS Online and check modules HW numbers. You need the VIN to get part numbers in ECAT (injectors, turbo, pcm). You can search google images for vehicle registration numbers and get the VIN using ETIS Online. To minimise any issues I made sure the following components are the same before trying to program its calibrations to mine:ДЄll of the part numbers can be checked in ECAT for your vehicle and the referenced one. Now, the reference vehicle should be of similar spec to yours.

Ford vcm 2 calibration files manual#

FOLLOW THIS PROCEDURE USING YOUR OWN VIN AND PCM NUMBER - THIS IS WHAT YOU WILL NEED TO DO IF THINGS DONT WORK!!!!ДЎ) get VIN and PCM calibration number from your reference vehicleДў) run IDS software without physically connected to VehicleДЈ) run Vehicle identification which will obviously fail and continue to manual vehicle identificationД¤) in manual vehicle identification enter the PCM calibration number - read on below about itДҐ) when asked enter the reference VIN and odometer value (any)Д¦) now you can navigate to Module Programming (PM not PMI) and program PCM but DONT PLUG IT TO YOUR VEHICLE YETД§) you should be asked to re-enter the VIN (enter the one from the reference vehicle)ДЁ) you will get an warning of a low voltageД©) connect the cable to your vehicle and follow the instructions on the screenДЎ0) after the programming is finished (takes around 10 min on mine) - you will need to reset all adaptation values as the current ones will be invalid (this is very important)!! - MAF, Injectors, TurboДЎ1) go for a drive - if it has any issues (no turbo, complete lack of power, or no start) - run the same procedure with your own VIN and PCM numbers. VERY IMPORTANT!!! - MAKE SURE YOU CAN RE-PROGRAM YOUR VEHICLE WITH YOUR OWN CALIBRATION NUMBERS (BEFORE TRYING ANY OTHER ONES). Reference vehicle details - (the hard bit - but can be found online) - needed to get the calibration numbers to use in my case this was Ford Transit Custom 2.2, 155ps

Your own VIN and PCM Calibration number to revert back in case of issues

Ford vcm 2 calibration files cracked#

IDS with programming capability ( VCM2 SP177-C1, VXDIAG Nano or similar) - cracked will do basic IDS knowledge (a lot of guides can be found here: use the Search button) I MIGHT NOT BE ABLE TO ASSIST IN CASE OF ISSUES. YOU ARE RESPONSIBLE YOURSELF FOR ANY HARM OR DAMAGE THAT YOU SUFFER AS A RESULT. This is based on my experience (Ford Transit Custom 2.2 125ps), UK based vehicle mapped from 125 to 155ps.

Ford vcm 2 calibration files how to#

This is how to remap using Ford IDS cracked software. Just make sure you have the correct one - mainly from a van/vin that has same turbo & injectors. Confirmed! There is a way to use IDS software to reprogram the Ford PCM using different calibration files.